AMSOIL INTERCEPTOR™ Synthetic 2-Cycle Oil

AMSOIL INTERCEPTOR™ Synthetic 2-Cycle Oil is formulated with a proprietary blend of the finest synthetic base oils and additives available today. This unique AMSOIL Chemistry represents a breakthrough development in the field of two-cycle engine lubrication. The backbone of AMSOIL INTERCEPTOR 2-Cycle Oil is a specially developed molecularly saturated synthetic base oil. This, combined with a robust additive package, ensures exceptional lubricity, cleanliness and optimum clean-burning characteristics. Extensive research and testing, including a full snowmobiling season in severe Rock Mountain applications, has proven that wear on cylinders, pistons and bearings is significantly reduced. And with up to 30 percent more detergency and dispersancy additives than typical two-cycle oils, AMSOIL INTERCEPTOR virtually eliminates hard carbon deposits that cause exhaust power valve sticking, ring sticking and pre-detonation promoting "hot spots" in the combustion chamber.

• Prevents hard carbon deposits that cause exhaust power valve sticking and ring sticking.
• Superior lubricity controls cylinder, piston and bearing wear.
• Reduces smoke and odor associated with two-cycle engines.
• Prevents plug fouling.
• Provides exceptional SAE #4 cold temperature fluidity (-58°F pour point).
• Versatile and excellent for all types of recreational equipment.
• Protects against rust.
• Prevents pre-detonation from combustion chamber "hot spots."

See Article:Two-Cycle Engine Applications and Lubrication Needs

PRODUCT DESCRIPTION
AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is formulated with a proprietary blend of the finest synthetic base oils and additives available today. This unique AMSOIL chemistry represents a breakthrough development in the field of two-cycle engine lubrication.

The backbone of AMSOIL INTERCEPTOR 2-Cycle Oil is a specially developed molecularly saturated synthetic base oil. This, combined with a potent additive package, ensures exceptional lubricity, cleanliness and optimum clean-burning characteristics. Extensive research and testing, including a full snowmobiling season in severe Rocky Mountain applications, has proven that wear on cylinders, pistons and bearings is dramatically reduced. And with up to 30 percent more detergency and dispersancy than typical two-cycle oils, AMSOIL INTERCEPTOR virtually eliminates damaging deposits on piston skirts, ring grooves and exhaust power valves.

APPLICATIONS (2-Cycle Recommendations Chart)
AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is recommended as an injector oil or at a 50:1 mix ratio in carbureted, electronic fuel Injected (EFI) and direct fuel injected (DFI) snowmobiles, personal watercraft, motorcycles, ATVs and jet boats, including, but not limited to, those manufactured by Bombardier®, Yamaha®, Arctic Cat®, Polaris®, Kawasaki®, Suzuki® and Honda®.

It is recommended wherever JASO FC or API TC two-cycle oils are specified. INTERCEPTOR is a premium quality replacement for recreational equipment manufacturers' branded two-cycle oils. It is compatible with most mineral and synthetic two-cycle oils, however, for best performance, mixing oils should be minimized.

400,000 Miles of Severe Snowmobile Field testing With No Deposit Buildup, Power Valve Sticking, Ring Sticking or Engine Failures.
Subjected to adverse field testing conditions in the Rocky Mountains, including long trail rides, high RPM powder riding and steep hill climbs, AMSOIL INTERCEPTOR demonstrated superior wear protection and outstanding deposit control.

No carbon deposits are detectable in the functioning region of the exhaust power valves, resulting in "no stick" performance, continuous valve operation and reduced maintenance.
Pistons show no scoring, little or no wear and no heavy deposits, and wrist pins show no discoloration from heat. In fact, the original machine markings on the pistons are still visible.	Cylinder head is clean with no deposits, preventing pre-ignition problems.

TYPICAL TECHNICAL PROPERTIES  INTERCEPTOR™ Synthetic 2-Cycle Oil
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)	8.5
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)	45.1
Viscosity Index (ASTM D-2270)	170
Pour Point °C (°F) (ASTM D 97)	-50 (-58)
Flash Point °C (°F) (ASTM D 92)	86 (187)
Fire Point °C (°F) (ASTM D 92)	86 (187)
ASTM Brookfield Viscosity @ -40°C (°F)	12100 cP
SAE Fluidity/Miscibility	#4
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.