Expanded Applications
AMSOIL custom EaAR Filter assemblies are designed for racing applications. They incorporate good
looks and excellent air flow in addition to the high efficiency afforded by AMSOIL Ea nanofiber
technology. These custom air cleaner assemblies are designed for use with carbureted engines that
use a 14-inch round element air cleaner housing. AMSOIL EaAR kits provide more air flow than
competing assemblies. The kits feature the common 14-inch diameter carburetor plate, air filter and
high air flow lid along with a two-inch, three-inch, four-inch, five-inch or six-inch-high filter.
Replacement filters, air flow lids and carburetor plates are also sold separately.
Ea Air Flow Lids
AMSOIL EaAR Filter kits provide racers with more power through the new Ea air flow lids. The air
flow lids are constructed using AMSOIL Ea nanofiber media, adding filtration area. They feature a
polished aluminum trim ring with AMSOIL logos etched on the surface. Not only do the Ea air flow
lids add filter area, they actually redirect air inside the filter to pull in more air through the
side pleats for even greater performance efficiency.
Advanced Filtration Technology
AMSOIL EaAR Air Filters are designed to replace stock cellulose, oil-wetted gauze or foam filters.
The nanofibers in EaAR Filter media have sub-micron diameters and small inter-fiber spaces,
resulting in more contaminants being captured on the surface of the media. Cellulose, wetted gauze
and foam filters are larger and have larger spaces between the fibers in the media, causing
contaminants to load into the depth of the filter, plugging the airflow path and resulting in
higher restriction than one micron in diameter, and because of their size, there are more pores per
square-inch (higher pore density), allowing for higher dirt-holding capacity and lower pressure
drop when compared to traditional filter media. Thinner media fibers, like those in EaAR Air
Filters, produce more uniform pore size distribution, improving the filter’s overall ability to
capture and retain particles.
Quality Construction
AMSOIL EaAR Filters’ nanofiber media is pleated with epoxy-coated wire for additional strength and
stiffness. A high-quality plastisol potting compound is used to ensure filter media and screen
stability while sealing the filter in the air box. The EaAR filtration system allows air to flow
both through the side of the filter and through the nanofiber media of the lid, adding more filter
area, greater performance and superior efficiency.
Quick Cleaning
AMSOIL EaAR Air Filters are cleanable and long lasting. AMSOIL recommends cleaning EaAR Filters
when designated by the restriction gauge if the vehicle is so equipped, or according to operating
conditions. In dusty conditions or in high-performance vehicles, more frequent cleaning may be
required. EaAR Air Filters may be cleaned by vacuuming the media on the dirty side or using
low-pressure shop air on the clean side. AMSOIL recommends cleaning EaAR Filters as conditions
dictate.
Consult the below dimension sheet for applications.
| AMSOIL# |
Diameter (in.) |
Height (in.) |
Description |
| EaAR2102 |
14" |
2.75" |
Complete Filter Kit |
| EaAR2103 |
14" |
3.625" |
Complete Filter Kit |
| EaAR2104 |
14" |
4.6875" |
Complete Filter Kit |
| EaAR2105 |
14" |
5.6875" |
Complete Filter Kit |
| EaAR2106 |
14" |
6.875" |
Complete Filter Kit |
| EaAR2140 |
14" |
N/A |
Replacement Base for Kit |
| EaAR2141 |
14" |
.875" |
Replacement Lid for Kit |
| EaAR2142 |
14" |
2" |
Replacement Filter for Kit |
| EaAR2143 |
14" |
3" |
Replacement Filter for Kit |
| EaAR2144 |
14" |
4" |
Replacement Filter for Kit |
| EaAR2145 |
14" |
5" |
Replacement Filter for Kit |
| EaAR2146 |
14" |
6" |
Replacement Filter for Kit |
|
